Anemometer Parts

Spare anemometer cups for Navis Anemometers. Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed + direction sensor) Consider these additional parts: 3.6 Volt Replacement Battery Sensor Head with Bearings for WS/WSD Sensor Directional Sensor Head With Bearings For WSD Sensor Wind Speed...

W410 Series display magnets. These magnets are used to attach the W410 Navis Anemometer display to metal surfaces, inside crane cabs and other metal surfaces. Helps to prevent display from being dropped or knocked over.  Compatible with the following displays: W410XB/BAT/D/FCC W410X Series Displays

Replacement standard SMA-915 antenna. Compatible with the following displays: WL12X/D/FCC W410XB/BAT/D/FCC W410X Series Displays

Replacement brass counterweight for self-levelling mounting assembly for Navis Anemometers. Consider these additional parts: WS/WSD Sensor Imbus (Set) Screw Metal Base For Sensor

Replacement WS/WSD sensor imbus screw (set-screw) for Navis Anemometers. This set-screw secures the anemometer to a mounting pole of your choice or secures the self-levelling bracket brass counterweight.

3.6 Volt Replacement Battery for Navis Anemometers. This battery is AA sized but note that the voltage is different from standard household AA batteries. Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed + direction sensor)

Spare directional wind vane for Navis Anemometer wind speed and direction (WSD) sensors. Compatible with the following sensors: WSD-011-2 (Wind speed + direction sensor) Consider these additional parts: 3.6 Volt Replacement Battery Spare Anemometer Cups Directional Sensor Head With Bearings For WSD Sensor Wind Speed And...

Replacement extended range wind speed sensor (WS-010-2) for Navis Anemometers. Compatible with the following displays: WR3B/D/FCC WL12X/D/FCC W410XB/BAT/D/FCC W410X Series Displays

Replacement display for Navis W410XL/D/FCC and Navis W410XW/D/FCC Anemometers. Display comes equipped with SMA-915 antenna and 12 volt power supply adapter. The Navis W410XL/D/FCC model has on-board data storage via SD card. Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed +...

Replacement display for Navis W410XB/BAT/FCC Anemometers. Display comes equipped with SMA-915 antenna and 3 x C batteries. Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed + direction sensor) Optional Accessories: Magnetic mounting hardware for W410 display 5V external power adapter...

Replacement W410X 12V Power Supply Adapter for the W410X Series (XL/XW) Navis Anemometer displays. Compatible with: 12 Volt Power Supply For W410X Series

Replacement rare earth magnets. Sold in single quantities, are used to attach the wind/wind + direction sensors for Navis Anemometers. Comes with mounting bolts. Compatible with the following parts: Mounting Bracket Plate For Magnets Purchase as assembly: Magnet & Bracket Assembly For Navis Anemometers Self-Levelling Bracket

Replacement mounting bracket plate for magnets. Used to attach the wind/wind + direction sensors for Navis Anemometers to mounting surfaces. Comes with mounting bolts. Compatible with the following parts: Rare Earth Magnets (each) Purchase as assembly: Magnet & Bracket Assembly For Navis Anemometers Self-Levelling Bracket

Replacement metal base for WS-010-2 (WS) Navis Anemometer Sensor. Comes with replacement imbus screw (set-screw). Compatible with: WS-010-2 (Wind speed sensor) Consider These Additional Parts: Spare Anemometer Cups Sensor Head With Bearings For WS/WSD Sensor

Replacement wind speed and direction sensor housing (WS-011-2) for Navis Anemometers. Consider these additional parts: Spare Anemometer Cups Sensor Head with Bearings for WS/WSD Sensor Directional Sensor Head With Bearings For WSD Sensor Spare Wind Vane For Direction Replacement Circuit Board For WSD-011-2 Sensor

Replacement wind speed sensor housing (WS-010-2) for Navis Anemometers. Consider these additional parts: Spare Anemometer Cups Sensor Head with Bearings for WS/WSD Sensor Replacement Circuit Board For WS-010-2 Sensor

Replacement directional sensor head with bearings for Navis Anemometer WSD-011-2 (WSD Sensor). Compatible with the following sensors: WSD-011-2 (Wind speed + direction sensor) Consider these additional parts: 3.6 Volt Replacement Battery Spare Anemometer Cups Sensor Head with Bearings for WS/WSD Sensor Wind Speed Sensor Housing Wind...

Replacement wind speed sensor head with bearings for Navis Anemometers. Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed + direction sensor) Consider other additional parts: 3.6 Volt Replacement Battery Spare Anemometer Cups Directional Sensor Head With Bearings For WSD Sensor Wind...

Replacement Circuit Board for WSD-011-2 (WSD) Sensor for Navis Anemometers. Consider these additional parts: 3.6 Volt Replacement Battery Spare Anemometer Cups Sensor Head With Bearings For WS/WSD Sensor Directional Sensor Head With Bearings For WSD Sensor Wind Speed And Direction Sensor Housing Spare Wind...

Replacement Circuit Board for WS-010-2 (WS) Sensor for Navis Anemometers. Consider these additional parts: 3.6 Volt Replacement Battery Spare Anemometer Cups Sensor Head With Bearings For WS/WSD Sensor Wind Speed Sensor Housing  

Replacement extended range wind speed & direction (WSD-011-2) Sensor for Navis Anemometers. Compatible with the following displays: WL12X/D/FCC W410XB/BAT/D/FCC W410X Series Displays

Replacement display for Navis WL12X/FCC Anemometers. Comes equipped with 4 x AA batteries.  Compatible with the following sensors: WS-010-2 (Wind speed sensor) WSD-011-2 (Wind speed + direction sensor) Optional Accessories: 5 Volt Power Supply For WL 12X Remote Antenna, 3m Of Cable + Magnetic...

Replacement display for Navis WR3B/FCC Anemometers. Comes equipped with 2 x AA batteries. Compatible with the following sensors: WS-010-2 (Wind speed sensor)